广西伴生放射性矿开发利用中的放射性水平初步调查

本文围绕广西境内17类矿产资源的开发利用展开调查,并对280家详查企业开发利用中的放射性水平进行了监测分析。结果表明:在原料与产品中,锆石和氧化锆、铅/锌、锗/钛、钒等行业²³⁸U、²²⁶Ra、²³²Th任一核素比活度大于1 000 Bq/kg。在固体废物中,稀土、锆石和氧化锆、铅/锌、锗/钛、锡、钒等行业²³⁸U、²²⁶Ra、²³²Th任一核素比活度大于1 000 Bq/kg。花岗岩企业的废水中总α、总β放射性水平偏高。研究发现,在对矿产开发利用企业开展放射性水平调查时,将γ辐射剂量率现场监测筛选标准下调50 nGy/h,即设定为在固体表面1 m处的γ辐射剂量率超过“当地本底水平”＋100 nGy/h时,可更为保守地避免出现遗漏放射性水平较高企业的情况。     

基于改进型巴特勒矩阵的短波8元圆环阵列多波束技术研究

传统短波接收天线为单一的波束指向天线或全向天线。为提高接收天线增益,同时产生多个波束指向不同方向,提出利用巴特勒矩阵作为短波接收天线阵的无源波束形成网络。在传统8×8巴特勒矩阵结构的基础上,设计改进型8×8巴特勒矩阵。以均匀8元圆环阵列为天线模型,利用FEKO仿真分析了其天线特性。在3~11 MHz频段内,P2、P3、P6、P7四个端口分别在202.5°、292.5°、112.5°、22.5°方向上得到了方向性较强的单一波束,7 MHz时波束增益达到最大11.9 dBi,波瓣3 dB宽度平均为60°;在P1、P4、P5、P8端口产生相同的2个波瓣,7 MHz时其波束增益达到最大9.8 dBi,波瓣3 dB宽度平均为89°。由以上仿真分析得出,该改进型8×8巴特勒矩阵能够同时产生6个波束,波束覆盖8个方向,提高了波束的方向性,提高了天线增益。     

一种基于深度森林的恶意代码分类方法

针对当前恶意代码静态分析方法精度不足的问题，将恶意代码映射为无压缩的灰度图像，然后根据图像变换方法将图像变换为恒定大小的图像，使用方向梯度直方图提取图像的特征，最后提出一种基于深度森林的恶意代码分类方法.实验中选择不同家族的多个恶意代码样本进行分类，验证了该方法的有效性，并且实验结果优于近期提出的SPAM-GIST方法.     

Cross-linked polyvinyl amidoxime fiber: a highly selective and recyclable adsorbent of gallium from Bayer liquor

Gallium, a scarce metal produced mainly from Bayer liquor, is widely used in semiconductors. Ion-exchange method is currently considered as the most effective method to recover gallium from Bayer liquor. In this article, fibrous amidoxime adsorbents are introduced to recover gallium from Bayer liquor. In addition, hydrazine cross-linked polyvinyl amidoxime (HPAO) fibers have been prepared. The structure of the as-prepared fibers was ascertained by FTIR, elemental analysis and weight gain rate. The adsorption kinetics, adsorption isotherm and recycling performance were investigated by batch method. Cross-linking duration was studied and it turned out to be an important factor to optimize the adsorption capacity and recycling performance. After 1.5 h cross-linking time, the fiber showed the highest gallium adsorption capacity of 14.83 mg/g in Bayer liquor. After 3 h cross-linking time, the fiber showed the best recycling performance, which retained 82.9% of the initial adsorption ability after four cycles. Adsorption capacity of vanadium was lower than 1 mg/g for all samples. HPAO displayed very fast adsorption kinetics with an equilibrium at 60 min. The EDS results confirmed the low extraction of aluminum and vanadium provided by HPAO fibers. The gallium-loaded fiber could be effectively eluted by acidified thiourea. With proper control of the cross-linking duration by hydrazine, HPAO fiber with high selectivity towards gallium, high adsorption capacity and good recycle performance could be obtained, which is promising for recovering gallium needed for industrial applications.     

中国钢化联产发展现状与前景展望

中国是一个钢铁生产大国,也是一个油气资源相对不足、煤炭资源相对丰富的国家。基于中国能源结构的实际情况,结合钢铁行业和化工行业的发展现状,讨论了钢铁生产各个工序煤气的发生与使用情况,并对钢铁流程副产煤气合成化工产品的现状与潜力进行了分析,指出了存在的问题。结合分析结果,提出了未来可再生能源廉价制氢发展达到一定阶段,钢铁联合企业可以通过“以氢固碳”实现钢铁生产大规模减少CO₂排放的目标,提升其清洁能源转化与高附加值化工产品生产的社会功能。最后,对未来中国钢化联产的发展提出了建议。     

页岩气地质评价关键实验技术的进展与展望

页岩气地质评价实验结果为页岩气地质"甜点"评价、地质选区、储量计算、水平井压裂层段优选及开发方案确定等提供了重要的数据基础与科学依据。近年来,随着我国页岩气勘探开发工作的不断深入,相关地质评价实验技术也取得了较大的进展。特别是在页岩微观孔隙结构、含气性和物性这3个方面,通过引进先进技术与自主设备研发相结合,建立了适用于我国海相页岩的分析测试技术和标准,对于推动我国页岩气的勘探开发进程发挥了重要的作用。为了给我国页岩气基础地质研究、实验室建设及相关标准制定提供参考和指导,归纳总结了国内外在上述3项页岩气地质评价关键实验技术方面所取得的进展,并对相关技术未来的发展趋势进行了展望。研究结果表明:①对于页岩微观孔隙结构测试,目前已经形成了多种手段相结合的定性观测和定量表征测试方法,实现了由静态表征向动态表征的转化,未来需要在页岩孔隙结构的原位表征和孔内流体赋存特征直接观测等方面做进一步的研究;②对于页岩含气性测试,目前已经建立了现场与室内相结合的含气性定量表征系列技术,实现了对页岩吸附气和游离气赋存特征的定量评价,未来需要在深层页岩损失气量计算、页岩气吸附机理及模型等方面做进一步的研究;③对于页岩物性测试,目前已经建立了多种方法相结合的孔隙度和渗透率测试技术,实现了对页岩孔隙有效性的定量评价,未来需要在孔隙度测试条件和方法等方面进行对比研究并统一标准。结论认为,只有不断地改进和优化页岩气地质评价实验技术,才能够满足科研与生产的需求。     

Hollow mesoporous silica nanoparticles as nanocarriers employed in cancer therapy: A review

Hollow mesoporous silica nanoparticles (HMSNs) have become an attractive drug carrier because of their unique characteristics including stable physicochemical properties, large specific surface area and facile functionalization, especially made into intelligent drug delivery systems (DDSs) for cancer therapy. HMSNs are employed to transport traditional anti-tumor drugs, which can solve the problems of drugs with instability, poor solubility and lack of recognition, etc., while significantly improving the anti-tumor effect. And an unexpected good result will be obtained by combining functional molecules and metal species with HMSNs for cancer diagnosis and treatment. Actually, HMSNs-based DDSs have developed relatively mature in recent years. This review briefly describes how to successfully prepare an ordinary HMSNs-based DDS, as well as its degradation, different stimuli-responses, targets and combination therapy. These versatile intelligent nanoparticles show great potential in clinical aspects.     

Airline planning and scheduling: Models and solution methodologies

The airline industry is a representative industry with high cost and low profitability. Therefore, airlines should carefully plan their schedules to ensure that overall profit is maximized. We review the literature on airline planning and scheduling and focus on mathematical formulations and solution methodologies. Our research framework is anchored on three major problems in the airline scheduling, namely, fleet assignment, aircraft routing, and crew scheduling. General formulation, widely used solution approaches, and important extensions are presented for each problem and integrated problems. We conclude the review by identifying promising areas for further research.     

自动化立体仓库消防给水设施设计探讨

立体仓库采用智能化出入库管理,集自动入库、智能化储存和自动化出库于一体,物品高度集中,火灾负荷集中的建筑。立体仓库的消防给水设施是其中重要的消防设施之一,本文主要分析立体仓库消防水系统的设计及参数的选择。     

混炼方式对螺旋纳米碳纤维增强天然橡胶复合材料力学性能的影响

采用干法和湿法两种混炼工艺制备了螺旋纳米碳纤维(HCNFs)/炭黑(CB)/天然橡胶(NR)复合材料,通过扫描电镜、拉伸试验机和应变扫描仪分别对所制备复合材料的界面形貌、力学性能和Payne效应进行了测试分析,考察了混炼方式对复合材料宏观力学性能及Payne效应的影响。结果表明,与纯CB填料相比,在干湿两种混炼方式下,添加适量的HCNFs(1～6份)能提高HCNFs/CB/NR复合材料的300%定伸应力、扯断伸长率、拉伸强度和硬度。与干法混炼相比,湿法混炼能明显增强HCNFs/CB/NR复合材料的Payne效应,并提升在HCNFs高添加量(2～6份)条件下的拉伸强度和扯断伸长率,这主要源于湿法混炼能够有效改善HCNFs在橡胶基质中的分散性。